Home > Shop More > Warewashing
Choose a sub category:
Dish Racks, Dollies Disposals, Disposers, Waste Drains Faucets, Assemblies
Flatware Washing, Storage Glass Washers, Racks etc. Misc Warewashing
Pre Rinse, Spray Units Sinks, Dishtables Warewashers, General
Water, Booster Heaters Glass Washers, Glass Racks etc.
Warewashing, Sinks
Sort By:
Page of 13
RL-30 (RL-30) Dishwasher - Insinger

Dishwasher, undercounter, 23"W x 25"D x 31-7/8"H, 3.5kw built-in booster, approximately 30 racks/hour cap., auto fill, 2.8kw tank heater, pumped drain, continuous wash cycle, (1) plate & (1) flat rack, stainless steel interior & exterior, TempGuard™ final rinse temp control, thermostatic controls, 1 HP wash motor, ENERGY STAR®

ea.
100 (100) Disposer - Salvajor

Disposer, basic unit only, 1 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE

ea.
200 (200) Disposer - Salvajor

Disposer, basic unit only, 2 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE

ea.
300 (300) Disposer - Salvajor

Disposer, basic unit only, 3 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE

ea.
500 (500) Disposer - Salvajor

Disposer, basic unit only, 5 Hp motor, single support leg, heat treated aluminum alloy housing, UL, CSA, CE

ea.
C-12 (C-12) Compact Booster Heater - Hatco

Compact Booster Heater, Electric, 6-gallon storage capacity, electric operation, 12-KW, stainless steel front, Castone tank

ea.
C-9 (C-9) Compact Booster Heater - Hatco

Compact Booster Heater, Electric, 6-gallon storage capacity, electric operation, 9-KW, stainless steel front, Castone tank

ea.
1524B (1524B) Cutlery Bin - Tablecraft Products

Cutlery Bin, 21" x 12" x 4", 4 compartment, stackable, black, made in USA, high density polyethylene, FDA approved (must order in multiples of 12 each)

ea.
1524G (1524G) Cutlery Bin - Tablecraft Products

Cutlery Bin, 21" x 12" x 4", 4 compartment, stackable, gray, made in USA, high density polyethylene, FDA approved (must order in multiples of 12 each)

ea.
GW-120 (GW-120) The Redhead Glass Washer - Admiral Craft

The Redhead Glass Washer, upright, electric, (5) brush, (4) 7" brushes and (1) 8-3/4" brush, stainless steel base with rubber feet, brass bearings and nylon gears inside base, 1/3 HP, 4.3 amps, 115v/60/1-ph, 7' cord, NEMA 5-15P, CE

ea.
7-PS-62 (7-PS-62) Hand Sink - Advance Tabco

Hand Sink, wall model, 14" wide x 10" front-to-back x 5" deep bowl, 20 gauge 304 series stainless steel, splash mounted gooseneck faucet, knee valve, basket drain, wall bracket, NSF, cCSAus

ea.
7-PS-23 (7-PS-23) Hand Sink - Advance Tabco

Hand Sink, wall model, 9" wide x 9" front-to-back x 5" deep bowl, 20 gauge 304 series stainless steel, splash mounted faucet, drain with strainer plate & 1-1/2" IPS connection, NSF, cCSAus

ea.
7-PS-51 (7-PS-51) Hand Sink - Advance Tabco

Hand Sink, wall model, 14" wide x 10" front-to-back x 5" deep bowl, 20 gauge 304 series stainless steel, electronic faucet (battery & 110v options both supplied), lever drain with overflow, P-trap, wall bracket, NSF, cCSAus

ea.
B-0113 (B-0113) EasyInstall Pre-Rinse Unit - T&S Brass

EasyInstall Pre-Rinse Unit, spring action gooseneck, single hole base faucet, 18" flex. stainless steel supply lines with comp. fittings for 5/8" OD copper tubing, 45"H, 14" overhang, 19-3/8" clearance, 24" riser, spray valve, stainless steel hose

ea.
B-0133 (B-0133) EasyInstall Pre-Rinse Unit - T&S Brass

EasyInstall Pre-Rinse Unit, wall mount, base faucet, spring check cartridges & lever handles, 2" diameter flanges with 1/2" NPT female eccentric flanged inlets, 35-1/2"H, 15" overhang, 8-1/4" clearance, 18" riser, spray valve, flex stainless steel hose

ea.
B-0107 (B-0107) Spray Valve Assembly - T&S Brass

Spray Valve Assembly, with hold down ring & rubber bumper

ea.
B-0107-C (B-0107-C) Spray Valve - T&S Brass

Spray Valve, low flow spray face, 0.65 GPM flow control, EPAct 2005 compliant

ea.
059X (059X) Nozzle - T&S Brass

Swing Nozzle, 6" (deduct cost of standard nozzle)

ea.
060X (060X) Nozzle - T&S Brass

Swing Nozzle, 8" (deduct cost of standard nozzle)

ea.
061X (061X) Nozzle - T&S Brass

Swing Nozzle, 10" (deduct cost of standard nozzle)

ea.
062X (062X) Nozzle - T&S Brass

Swing Nozzle, 12" (deduct cost of standard nozzle)

ea.
B5C-18 (B5C-18) 1800 Series Underbar Sink Unit - Eagle Group

1800 Series Underbar Sink Unit, three compartment, 60"W x 20"D x 33-1/2"H, 304 stainless steel construction, 10"W x 14" front-to-back x 10" deep seamless deep-drawn compartments, 12-1/2" drainboards on left & right, 4-1/2"H backsplash, bullnose front edge, 4" O.C. splash mount faucet with 10" spout, includes 1-1/2"Drains & removable overflow standpipes, galvanized steel back & end panels, galvanized steel legs with adjustable bullet feet, NSF

ea.
B6C-18 (B6C-18) 1800 Series Underbar Sink Unit - Eagle Group

1800 Series Underbar Sink Unit, three compartment, 72"W x 20"D x 33-1/2"H, 304 stainless steel construction, 10"W x 14" front-to-back x 10" deep seamless deep-drawn compartments, 18-1/2" drainboards on left & right, 4-1/2"H backsplash, bullnose front edge, 4" O.C. splash mount faucet with 10" spout, includes 1-1/2"Drains & removable overflow standpipes, galvanized steel back & end panels, galvanized steel legs with adjustable bullet feet, NSF

ea.
B6C-4-18 (B6C-4-18) 1800 Series Underbar Sink Unit - Eagle Group

1800 Series Underbar Sink Unit, four compartment, 72"W x 20"D x 33-1/2"H, 304 stainless steel construction, 10"W x 14" front-to-back x 10" deep seamless deep-drawn compartments, 12-1/2" drainboards on left & right, 4-1/2"H backsplash, bullnose front edge, (2) 4" O.C. splash mount faucets with 10" spouts, includes 1-1/2"Drains & removable overflow standpipes, galvanized steel back & end panels, galvanized steel legs with adjustable bullet feet, NSF

ea.
150 (150) Disposer - Salvajor

Disposer, basic unit only, 1-1/2 Hp motor, heat treated aluminum alloy housing, UL, CSA, CE

ea.
DF (DF) Glasswasher - Moyer Diebel

Underbar Glasswasher, rotary design, 25" cabinet, 1200 glasses/hr, 12" glass clearance, polypropylene conveyor with clockwise rotation, upper & lower wash & rinse arms, (3) pump injection system, chemical sanitizing, cool water rinse, drain tray & waste collector standard, stainless steel construction, 208-230v/60/1-ph, 15.0 amps, NEMA 6-15P, NSF, UL, CSA (includes: authorized factory start-up)

ea.
HSA-10-FA (HSA-10-FA) Hand Sink - Eagle Group

Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, P-trap & tail piece, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF

ea.
HSA-10-FL (HSA-10-FL) Hand Sink - Eagle Group

Hand Sink, wall mount, 14"Wide x 10" front-to-back x 5" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, lever drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF

ea.
HSA-10-FDP (HSA-10-FDP) Hand Sink - Eagle Group

Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, splash mount gooseneck faucet, 1/2" NPS water inlet, towel & soap dispensers, basket drain, deep-drawn seamless design-positive drain, inverted "V" edge, NSF

ea.
HSA-10-FDPE (HSA-10-FDPE) Hand Sink - Eagle Group

Hand Sink, wall mount, 13-1/2"Wide x 9-3/4" front-to-back x 6-3/4" deep bowl, 304 stainless steel construction, electronic eye gooseneck spout, soap & towel dispensers, basket drain, deep-drawn positive drain sink bowl, 7-1/2"High backsplash, all welded, includes mounting brackets, inverted "V" edge, NSF

ea.